R80 General Purpose Retainer

PRODUCT DESCRIPTION: 
The Saftlok R80 is a medium-viscosity, high-performance fill-in-space component with high shear stresses up to 180 ° C. This product has been developed for use on bushings, bearings, gears, bearings, cylindrical shafts for operation on shafts and camshafts of rollers. It also serves to increase the durability of the press connections. The Saftlok R80 reaches its full strength within 8-24 hours depending on the cleaning, configuration. If heated to 120 ° C, it will cure in 10-20 minutes.

COST REDUCTION: 
Milling, grooving, thread cutting, drilling, thinning, drilling, etc. necessary for mechanical fastening systems are eliminated. It provides close tolerance and smooth surface for press connections. Removes gaps from links.

INCREASING RELIABILITY: 
Prevents corrosion and vibration expansions, increasing the strength of the press connections.

USE EASY AND RELIABLE: 
There is no need to mix or heat the one-piece adhesive to measure it to solidify. It is unbearably easy to clean, odorless. It has a wide range of application methods to meet special needs.

PHYSICAL CHARACTERISTICS: 
Meets TYPE 1 for MIL R 46802 and ASTM 4562

BEFORE CURING: 
Resin Dimethacrylate
Color Green
Viscosity 1500 cps
Density 1.1 gr / cc
Flash point> 95 ° C
Toxicity Low
No Corrosion
Shelf life 12 months

AFTER CURING: 
Shear stress 207 Bar
Full cure time 8-24 hours
Temperature Range -54 ° C to 180 ° C
Gap fill 0.05 – 0.25 mm
Chemical resistance Excellent